I am trying to do something like that:
I have a SRX with reth1.1 (192.168.1.1 and vlan-id 1) and reth1.12 (192.168.12.1 and vlan-id 12).
Both interfaces are in the same zone but the subnet 192.168.12.0 was created for Junos Pulse users with DHCP pool defined in Resources Policies using the range 192.168.12.101-125.
The MAG is in the subnet 192.168.1.0 using IP 192.168.1.1 in the internal port.
Between SRX and MAG and have just a EX 4200. I created a Vlan Port in the MAG using vlan-id 12, IP 192.168.12.10, gtw 192.168.12.1. In the role I selected Vlan/source ip.
I put the interface of EX in mode trunk and chose vlan-id 1 as native-vlan and vlan-id 12 as vlan member but i lost the connection to the MAG.
What else? Do i need to change something in default vlan on MAG?
Solved! Go to Solution.
The internal port will remain in the default VLAN. Which means the untagged traffic will be sent over the default VLAN with a VLAN ID 1 and tagged traffic will be sent over the VLAN you have created.
Can you check 2 things :
check if the traffic for vlan1 is tagged on the switch,if yes please untag it and try
Under system--->virtual systems-->root-->verify if the vlan is added and the vlan ip pool is defined
Please mark this as an accepted solution if it resolves your query
I forgot to enable vlan in role general.
Thanks for your help.