Hi all, i use some drive mapping with my ssl/vpn connection. I'ive setup following the netapp documentation.
It works fine, but on one machine i get the error 53:network path not found. I use the same map command (net use X: ....) on another computer with the same OS that's Windows XP SP3 with the latest update, the same FW (XP) and AV (AVG) and it work fine. I'm in trouble with this.
Anyone have some idea to help me. (It's the PC of the big boss ) )
Hi, thanks for the response. The ip config is the same on 2 machine.
I've also tried to put the name of our sharing server on hosts file but with no result.
are you using the FQDN or the IP of the server and not a short name? i.e. if you are using a server on juniper domain make sure you type the full name of the server net use q: \\abc.juniper.net\share /u:username password
i am thinking it is a DNS suffix issue. try the above command or instead of the FQDN try the ip of the server
Thanks Mrkool, thanks Haas forthe response. I'm not using the FQDN, i send the new command with the FQDN to my boss and ask him to test. I post a reply when test is done.
I'm using WSAM
Oups!Sorry is not Netapp but Juniper document (i mix two provider )
I've test with the FQDN but with no success. It's a very amazing problem, the same command works on all computer i've tested (XP or Vista) but not on this one. Grrrr!
I told to my boss to leave me his laptop a couple of hours to check him in depth.
I keep you informed
Is this over network connect or SAM? I am trying to get SAM to work and having a hell of a time. What is this netapp document you are mentioning?
Haas, make sure when specify the file server in the SAM policy, you use the NetBIOS name instead of IP address. You can also specify the ports (139 & 445). Make sure it is specified in the role and the SAM policies page both.