Hardware Guide MAG-SM160

[oscar.jimenez_]

hi 

i want to know if is there any hardware guide for service module MAG-SM160 ? the service module have three interface and i would like to know the function each one 

Oscar Jimenez

[rdit_ · Accepted solution]

I was also not sure about the interfaces and wasnt able to find the hardware documentation either. I just tested it then and its like that:

eth0 = Management Interface (new, didnt exist on SA)

eth1 = Internal Interface

eth2 = External Interface

First I thought it would be the same as the order in the webinterface under "Network -> Overview" but it isnt. There its:

Internal(eth0) - External(eth1) - Management(eth0)

Hope that helps!

[npradeep_]

Please do refer the following doc.

http://www.juniper.net/techpubs/software/mag/guides/j-pulse-gateway-cmc-quick-start-guide.pdf

If you agree with this answer, please mark it as accepted solution.

[NULL_]

Hi rdit,

also on Juniper SA there has been a MGN Interface.. but only on larger ones ;-)

Have a nice weekend

best regards

NULL

[oscar.jimenez_]

Thanks 

the following link have the information

http://www.juniper.net/techpubs/en_US/mag/topics/task/operational/mag-connecting-to-network.html

Oscar Jimenez sanabria