What NAP? After a quick look, it looks like a NAC system that has Host Checker-like capability; is that correct? If there is a client installed on the PC, you can check for that. If it uses TNC IMV/IMC you should be able to configure this on your SA; but this is not something I have heard or seen yet. It looks like the MS NAP product is similar in nature to the Juniper Unified Access Controller (http://www.juniper.net/us/en/products-services/security/uac/)
thanks for your reply.
I like to configure Microsoft NAP Servers as IMV Servers to our Juniper SA.
On the above link i found the following:
Juniper UAC supports Microsoft NAP/SOH with an own Module.
Can i configure Juniper VPN SSL SA 7.0 on an 4500 Cluster for comunication with an Microsoft NAP Server?
The module you referenced is available only for the Juniper UAC platform.
If the Microsft NAP server supports IMV/IMC communication, I would expect this to be possible by following the setup information on both sides to create that link; unfortunately, I do not know for sure if that will work.
I would recommend opening a case with JTAC and asking them for help with IMC/IMV configuration.
Does the NAP server install software on the client that you could check for using a custom process check in Host Checker and if that is present, allow access; then from there the communication to the NAP server could happen over Network Connect?