Dear All:
The Juniper SA6500 is interconnecting with the CISCO 3750, with 100M. There is quesition with the interface , which statistics shows:
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 27/255, rxload 8/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters 4d20h
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 4169
Queueing strategy: fifo
By checking the SA6500, there is no any drop packets. Please advise any possiblity of drops. Could expand the bandwidth of ethernet port from current 100M to 1000M would solve the problem?
Thanks for any idea.