cancel
Showing results for 
Search instead for 
Did you mean: 

Interface Drop Packets (Interconnecting with the CISCO 3750)

blueseabin_
Occasional Contributor

Interface Drop Packets (Interconnecting with the CISCO 3750)

Dear All:

The Juniper SA6500 is interconnecting with the CISCO 3750, with 100M. There is quesition with the interface , which statistics shows:

 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 27/255, rxload 8/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX
  input flow-control is off, output flow-control is unsupported
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output 00:00:00, output hang never
  Last clearing of "show interface" counters 4d20h
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 4169
  Queueing strategy: fifo




By checking the SA6500, there is no any drop packets. Please advise any possiblity of drops. Could expand the bandwidth of ethernet port from current 100M to 1000M would solve the problem?

Thanks for any idea.