Has anyone run across problems with inverse split tunneling, where the action is set to deny instead of allow on the split tunneling policy and the network that is excluded from the tunnel is 22.214.171.124/22. The way it should work is that everything is allowed through the tunnel except for the 126.96.36.199/22 network. The users are on the 188.8.131.52/24 network and cannot access network resources on the 184.108.40.206/24 network when using Network Connect. It seems that the traffic going to 220.127.116.11/24 is being tunneled. I have a ticket in for this, but I was wondering if anyone came across this and was able to get it to work properly. I am running 6.5R3.1 code on SA-6500s. Thank you in advance for any help you can offer!