Multi-site cluster

[radwal_]

Is it possible to have IP addresses belonging to different subnets on the internal interfaces connected through WAN for sync purposes when deploying multi-site cluster?

Best Regards,

Radek

[MasterArtisan_]

It should work. As long as the route is good.

[joels_]

I think it's dependant on the cluster type. An Active/Passive cluster working together is recommended to be on the same subnet, although that subnet can span multiple sites if you trunk your VLANs between the sites.

An active/active cluster can be on different subnets as they are effectively working seperately from each other.

[Brian_]

You could put the IVEs in an active/active cluster with DXs in front of them, then place the IVE targets in global server load balancing group.