cancel
Showing results for 
Search instead for 
Did you mean: 

Network Connect & Vista Enterprise SP1

miked_
Contributor

Network Connect & Vista Enterprise SP1

I didnt see anything in the boards on this.....I am running 5.5R7 and sometimes when i launch NC it works, and other times it asks me to install the Juniper installer service- which is installed.

If i make it through that, then NC doesnt use the correct DNS, for example if  I do ping from the command prompt:

ping abcd

wins picks it up and it pings correctly, but using wins and not dns.  If i try pigining the domain, i get nothing- same if i try to ping the FQDN abc.domain.com (internally this works fine) For the NC profile, I have it set to check device DNS first then client, although i have tried it with client first and still have the same issue.

I know that 5.5r7 doesn't officially support SP1 Vista, but it does support vista- could this be a potential issue- well i am sure it could be, but what would have changed.



Message Edited by miked on 01-16-2009 10:22 AM


Message Edited by miked on 01-16-2009 10:23 AM


Message Edited by miked on 01-16-2009 10:24 AM




Mike