Patching a Pulse Secure MAG 2600 device and adding a SSL Certificate to the MAG2600.

[Tharris1530]

Hi Community - This is my first post and I hope I can get some assistance from you guys! 

I need to patch the MAG2600 device I have and I don't know the following: 

A) Where to get the latest security patches

B) How to apply them

Also, I have a new SSL certificate that I need to add to the device. What are the steps to that? The cert was purchased from GoDaddy.

[Tharris1530]

I need to patch the MAG2600 device I have and I don't know the following: 

A) Where to get the latest security patches

B) How to apply them

Also, I have a new SSL certificate that I need to add to the device. What are the steps to that? The cert was purchased from GoDaddy.

[[email protected]]

@Tharris1530 MAG series would support only till 8.X range, hence the max version that you can upgrade the MAG device is 8.3R7.1 code. 8.3R7.1 has the following security patch - https://kb.pulsesecure.net/articles/Pulse_Security_Advisories/SA44101

No more security updates will be released for MAG as 8.X codes are End of Life.

NOTE: There has been other security patches released which cannot be installed on MAG platforms, hence the general recommendation is to do a hardware upgrade (PSA appliances) which can support the latest security patches released by Ivanti.

# Security update are generally in the form of firmware package, hence you would need to just upgrade to the device to that version, no special instructions.

Cluster upgrade - https://www-prev.pulsesecure.net/download/techpubs/current/420/pulse-connect-secure/pcs/8.3rx/How_To...

Standalone upgrade - https://www-prev.pulsesecure.net/download/techpubs/current/431/pulse-connect-secure/pcs/8.3rx/How_To...

Certificate installation KB - https://kb.pulsesecure.net/articles/Pulse_Secure_Article/KB22288/?kA1j0000000FjLV