Showing results for 
Search instead for 
Did you mean: 

Question about SSL VPN PTP mode

New Contributor

Question about SSL VPN PTP mode

200 OK
Date: Thu, 29 Dec 2016 04:58:40 GMT
Content-Type: application/json;charset=UTF-8
Content-Length: 152
P3P: policyref="http://aitpro.local/w3c/p3p.xml", CP="NOI DSP COR NID CUR ADM DEV OUR BUS"
Connection: keep-alive


Above is a packet sent by webapp server to client via PTP mode SSL VPN(MAG6611)

After the webpage running on the client received the packet, it goes directly to not as expected as

the domain is already on the PTP replace list and was redirect to

So is there a configure to replace the link on the parameter section in a packet? Or is there an alternative method to this problem?

Thank you!

Re: Question about SSL VPN PTP mode

It may be an application that cannot handle the changes done by passthrough proxy.
What do you have enabled to be rewritten in the passthrough proxy policy?
Why are you using passthrough proxy rather than standard rewrite?
Do you have custom headers enabled (Users>Resource Policies>Web>Rewriting>Custom Headers)?
New Contributor

Re: Question about SSL VPN PTP mode

thanks for your reply!

the application handle the change just fine

as for the rewriting configure, everything was left default except certain domains with 80 and 443 port set to be rewritten.

I looked into your last advise but the link is not in the header section but parameter section.
is there any chance than the parameter section can be filtered and replaced either?