cancel
Showing results for 
Search instead for 
Did you mean: 

Static IP assignment

Highlighted
Not applicable

Static IP assignment

Does the client allow for assignment of a specific IP address to a user when they log in?
Tags (1)
3 REPLIES 3
Occasional Contributor

Re: Static IP assignment

if you are using network connect pool , i do not think so, because the PCS will take the first available ip on the pool.
if you are using a external DHCP server for ip allocation, you may setup rules on that.

else, but not good from "design" or administration pov, it is to setup a static mapping with a specific network connect ressources profile for each user Smiley Sad

regards
Highlighted
Community Manager

Re: Static IP assignment

Not within the client. You can have the PCS device learn the IP address for a radius or ldap attribute during authentication, then use this value to assign a specific IP address.

https://kb.pulsesecure.net/articles/Pulse_Secure_Article/KB23399
Highlighted
Pulser

Re: Static IP assignment

In addition to the radius/ldap attribute option this can also be achieved if you use an external dhcp server.

By default when the Connect secure device makes a DHCP request it embeds the clients hostname, you could change this to send the username (refer admin guide and search for "DHCP options" for config instructions) and then configure DHCP server to provide the same IP each time if the request contains the same username.