I have a problem getting the my SA's visible from the Internet.
I have two SA2500's in a active/passive configuration. The external interfaces are connected to a firewall and the internal interfaces are connected to the local LAN.
I have both the external and the internal interfaces set up with VIP-addresses (as well as individual addresses for each port). The firewall allows https-traffic the the external VIP-address and the firewall also NAT's the external VIP-address.
Now, when I try to connect to the address the firewall translates to I don't get any response what so ever. I have checked the routing-settings and so on on the SA's. I'm quite lost what to check next actually, and I hope you guys can help me.
If you need any more information just let me know and I will provide as much as I can.
Thanks in advance!
I would check "User Port" under Network, External Port. Make sure it's enabled. I would also check your rotuing by going to Network, Routes (Internal/External drop down). Try pinging your gateways from the SA using Troubleshooting, Tools, Commands. The last thing I would check is under Realms, Admin Realms, Authentication Policy, Administrator Sign-in ports.
under tools run a tcp dump on the oexternal; interface. It may help to see where failing
I belive that you are trying to access the SA access through hotsname URL ( signin URL), also understand that there is no routing issues.
What is your IP address that is mapped in DNS server for SA hostname, make sure you have mapped SA's external VIP and external port for the host A record of your DNS server since you have enabled SA external and internal port.
After this try pinging the SA hostname or the URL from the internet, if its still failing, please provide the traceroute information and the also provide the device information where it fails.
Actually I have no hostname set for the device yet. I am just trying to reach the VIP-address from the outside (not actually the VIP-address, but the address that it is NAT:ed to).