The issue exits without the Vasco so this look like IAS and Juniper issue.
Radius ping works so Microsoft IAS is working fine I guess. Also, moving
to another server with IAS didnt helped.
There is no firewall/LAN so this look like a mystry for now.
Hi, There is no firewall (flan LAN) and the juniper can ping to the IAS etc.
I even setup a new IAS server on a fresh installed server and the same error
I tried to downgrade to IVE Platform version 6.3 R1.1 Build # 13563 and now
I getting a new error:
2008/12/12 23:16:33 - [10.0.0.1] - username(Users) - Sign-in rejected using auth server Tadius_Server (Radius Server). Reason: Failed
Very strange... Look like IVE bug.. The same errors message was reported in the past on 6.0R3 if I dont mistake.
Also, the TAC doesnt find any solution until now.
Does anything appear in the Vasco Audit Viewer? (ie failed login attempt etc)
Also, you say that you're using both NICs on the IVE. I assume that the routes are set up correctly? Can you ping the Vasco server from the IVE? When you set up RSA, was it in the same subnet as the Vasco server now is?
I cant ping to the internal SA Nic and the SA can ping to the server.
The RSA was setup in another server in the LAN (In the same subnet).
The login attempt sometimes appear in the Vasco log and sometimes no.
However, Vasco simulator works fine (i.e the same apply to Vasco logs while using
I tried also to install a fresh IAS without Vasco and the same error occured so I guess
that this isnt Vasco issue.
Internal Nic 10.0.0.253 /24
DG 10.0.0.254 /24 (SSG 140 LAN/Trust zone)
External Nic 220.127.116.11 /24
DG 18.104.22.168 /24 (SSG 140 DNZ Zone)