check disk space on SA2500

[phuongdtt_]

I can't see datasheet statistic SA on web management. I just see them below graphs (CPU, log...how percent). Can you help me show this information on web (% use space, % available space, CPU.....below statistic)

Thanks for your help

[Kita_]

Hello Phuong,

Disk space is labeled "State Storage" on the System Status page. This option is disabled by default and you'll need to click Page Settings in the upper left hand corner of the System Status page to enable it. Once enabled, this should appear in the left pane. If the SA device is running 7.1, you can view this information via console acccess as well, option 3. Display log/status>4. Resource usage data.

If you want to know the overall size, this can be viewed via console access when the SA device is booting up.

[phuongdtt_]

Hi Kita

At first, thanks for your reply. I wonder that , Stage storage concerns with user data, It doesn't include how percentace use space, available space ( totally, I want to mention about capacity). I don't know I think that, is it wright or wrong. Can you tell me? And can you explain about fragmenIed on Stage storage, I really don't understand clearly.

As you say, If I want to see overall size when I connect to console port, which option I have to chose to see size?

"
Please choose from among the following options:
1. Network Settings and Tools
2. Create admin username and password
3. Display log/status
4. System Operations
5. Toggle password protection for the console (Off)
6. Create a Super Admin session.
7. System Snapshot
8. Reset allowed encryption strength for SSL

"

Please help me.Thanks so much

[zanyterp_]

the total disk size cannot be seen on the system. you can check with your account team on if this is available through them. or during boot the size is displayed.

[phuongdtt_]

Hi Zanyterp

I attach file about the process of reboot . During booting, I can't see total size of SA

[Kita_]

Hello Phuong,

The screen gets cleared during the BIOS boot and is where the disk space is stated. Here is a capture before the screen is cleared

################

Adaptec Embedded SATA HostRAID BIOS V3.1-1 1255
(c) 1998-2004 Adaptec, Inc. All Rights Reserved.

<<< Press <Ct l><A> for Adaptec RAID Configuration Utility! >>>

Controller #00: HostRAID-ICH5R at PCI Bus:00, Dev:1F, Func:02
Loading Configuration...Done.
Port#00 WDC WD800JD-22JNC0 05.01C05 74.53 GB Healthy

Array #0 - RAID-1 IVE 74.47 GB Degraded

1 Logical Device(s) Found.


BIOS Installed Successfully!

##############

[phuongdtt_]

Do you think I need to chose which option to display overall size during booting on SA ? As you say, the screen is cleared, so I can't see anything about size. How can I configure to see size when it reboot ? Are parameters concerned with displaying on screen reboot?

Thanks so much

[phuongdtt_]

the screen show:

CPU= Intel (R) Celeron(R) D CPU 2.00GHZ

FSB at 800MHZ

Intel (R) Extended Memory 64 Technology

DRAM Type : DDR2-667 ECC Support

1023M System RAM Passed

512K Cache SRAM Passed

System BIOS shadowed

Video BIOS shadowd

System BIOS shadowed????? do you think about that