Showing results for 
Search instead for 
Did you mean: 

removing danainfo

New Contributor

removing danainfo


Need suggestions on the below.

I have configured Juniper SA 6000 6.0R4 and enabled some web profiles.

Whenever i access an application, the URL is something like this -,DanaInfo=

As this is a request tracker application, there are some automated mails which go to customers stating an update in request status.

But if i access the URL then this does not work and i get a message "Not Found"

Can i eliminate danainfo part from the URL so that the customers can access direct URLs ?

Any help would be greatly appreciated.




Occasional Contributor

Re: removing danainfo

Have you tried turning off re-writing for this URL?

Super Contributor

Re: removing danainfo

If you want to access the internal server using a URL with no danainfo in it, you must use something other than the standard web rewriting function of the SA. For the sake of the example, I'm going to assume you can give a DNS name of in your internal DNS. In this case, the original (internal) URL would look like -

and the rewritten URL would then be,

If you want the user to be able to use the original URL from the outside, you have two options -

(1) Use SAM (either JSAM or WSAM will work) to modify the user's HOSTS file and forward packets to the internal server.

(2) Use passthrough proxy and define "" as the alias. In this case, you would have to define "" in your external DNS with the address of the SA.

The "Danainfo" construct is central to the Juniper web rewriting function. Unless you use something other than standard rewriting, you will not be able to eliminate it.

New Contributor

Re: removing danainfo

Thanks for the replies.

Just to correct the above, i don't want users to access the original URL, instead i want the URL to be accessed via the external one.

For ex. suppose the internal URL is something like

Then my external URL should be

Where maps to address of SA in external DNS.

This external URL is actually sent in the reminder mails to request assignees so that they can directly open the request (post SA authentication)

Let me know your thoughts on the above.



Super Contributor

Re: removing danainfo

I think you can make this work with passthrough proxy. I've got very little experience with that - maybe someone else on the forum can help.