Problem with Juniper Network Adapter on Windows10

[Paco]

Hi, all

I have the same problem and this topic describes it exactly what happens in my situation.

I am running version 5.3.4 Build 1183 of the Pulse client  and Cisco Jabber 10.6.2 (Build 59142) on a Windows 10 (1709) Laptop.

I found out a workaround. I have disabled "Cisco Media Services Interface Protocol Driver"  on "Pulse Secure" connection.  I don't know yet the impact on the Jabber application, however both Jabber and Pulse work.  

[zanyterp]

Thank you for confirming that you are seeing the same successful result after disabling the Cisco driver from the Pulse adapter

[thedreeny]

Hello,

        I'm facing the the same issue on Pulse Secure 5.2.6 (977).

I don't have Jabber nor any connect installed - but I've Mcafee installed.

can you advise how to fix this issue  please ?

thanks

Amr

[EdoLank]

Hi,

the problem can occur if you have a Microsoft Wi-Fi Direct Virtual Adapter

You can fix this problem by disabling the Adapter:

1. From the control panel, navigate to the Device Manager.
2. From the device manager menu, click on View > Show hidden devices.
3. Under Network Adapters, disable the Microsoft Wi-Fi Direct Virtual Adapter

Then, it should work.