CTP2024 Authenticating via RADIUS through Cisco ACS

[jeffersw_]

Has anyone configured Radius authentication to work via a Cisco ACS from a CTP2024?  I have figured out the correct attributes for both the CTPView Server and CTPView but am unable to get authentication to work from the actual CTP's themselves via ssh. 

 - I have confirmed that the CTP can talk to the Cisco ACS with no issues.

- The shared secret is the same on both devices

- If you have a local username on the CTP and try to authenticate via ACS the ACS log shows authentication successful but doesn't give you access to the CTP

- If you don't have a local username on the CTP and authenticate via ACS the ACS logs show invalid password (even though the password is correct).

Any ideas?  

[kalagesan_]

Hi Jeff,

I understand that you are trying to configure Radius authentication to work via a Cisco ACS from a CTP2024, you need to post the query in the below routing forum which where CTP related queries can be answered by appropriate people

http://forums.juniper.net/t5/Routing/bd-p/IProuting

Regards,

Kannan

[Raveen_]

What is the CTP OS version in use?

[jeffersw_]

Kanan,

I will post in the routing forum as well per your suggestion.  I just figured this was more a Identity/Control issue than a routing problem which is why I posted here. 

CTP OS is currently 6.2 R5