cancel
Showing results for 
Search instead for 
Did you mean: 

JUNOS PULSE and Juniper IC

SOLVED
Highlighted
New Contributor

Re: JUNOS PULSE and Juniper IC

Dear Raveen,

> To configure Pulse dot1x you should do below:

>

> - Start Wired AutoConfig service

> - Navigate to Local Area connection Properties (NIC properties)

> - Click 'Authentication' tab.

> - Under 'Choose a network authentication method:' drop down box, you should see 'Juniper Networks: EAP-TTLS'

> - Select EAP-TTLS to do dot1x using pulse.

Is there anyway to automate the above process. I am thinking how to mass deployment ...

Thanks,

Charles

Highlighted
Regular Contributor

Re: JUNOS PULSE and Juniper IC

Hi Experts

Is there any one to tell how to configure the L2 settings on IC without going to each PC and do the configuration on network adaptor level?

Highlighted
Regular Contributor

Re: JUNOS PULSE and Juniper IC

You need to leverage GPOs(Group policy) to enable Wired/Wireless Zero config service. For Pulse installation without user intervention, you can do as part of MSI push. Regards, Raveen
Highlighted
Regular Contributor

Re: JUNOS PULSE and Juniper IC

Hi Raveen

But how we can do this using MSI for pulse installation?