L3 and L2 UAC Deployment with linksys SRW248G4

[NDCool_]

Hi All,

I have POC to deploy UAC in L2 and L3 scenario (combine).

For now L3 deploment work fine and next step will deploy both. The switch using linksys SRW248G4, does it support for UAC deployment, for guest-vlan and as UAC radius client ?

Any one already did it with this switch ?

If this switch didn't support, how to configure L3 deployment and user must have odyssey agent for host check.

I have tested by didn't configure anything at linksys, and user login using odyssey/agent to IC but not success.

at IC users logging have error messages :

Info EAM24460 2009-02-19 14:05:13 - ic - [190.10.10.11] juniper()[] - No EAP protocol was agreed on
Info EAM24460 2009-02-19 14:05:05 - ic - [190.10.10.11] juniper()[] - No EAP protocol was agreed on
Info EAM24460 2009-02-19 14:04:35 - ic - [190.10.10.11] juniper()[] - No EAP protocol was agreed on

Any one can help me ??

[Kamran_]

hi

check Authentication Protocol Set in IC-4000 interface and OAC protocols at Endpoint, both should match

Regards,

Raja

[aronow_ · Accepted solution]

Also, try restarting the services on your IC.

Sometimes when you make changes like adding radius clients or adding realms, you have to restart services on the IC in order for the radius server to see things correctly.

The no eap protocol doesn't sound like problems with the radius client configuration though. Its either the protocol set or restarting services should resolve the issue.

[NDCool_]

Hi All..

yes..after i called juniper guy from malaysia, he told to restart the services and now uac with L3 deployment with agent work fine.

like aronow says....

thanks aronow...