Nortel switches attributes on UAC 2.1

[rodaballo_]

Hello,

does anybody know if UAC supports Nortel dct file (radius attributes)? If yes, could you please help me find link to dct file?

I would like to manage switches series:

ERS supports 802.1x

ERS and ES supports SCCP

Thank you.

Regards

Ondrej

[sylvain_ · Accepted solution]

Hi rodabello,

You don t have to import the Nortel dct file for a such config : i ve already installed UAC in a Nortel environment and it works pretty well with the native attributes, They are :

- Tunnel-Type = 13

- Tunnel-Medium-Type = 6

- Tunnel-Private-Group-ID = YOUR_VLAN

Hope this will help

[rodaballo_]

Hi sylvain,

thank you for reply. It helped me a lot.

Thank you

Bye rodaballo

[Stanislas_]

You don't need to had attributes

- Tunnel-Type = 13

- Tunnel-Medium-Type = 6

- Tunnel-Private-Group-ID = YOUR_VLAN

check VLAN option do the same.

With some Nortel switches, Standard RADIUS dictionary work for VLAN less than 1000 and failed for VLAN more than 1000. this is caused by an incompatibility between Juniper and Nortel interpretation of 802.1X Tags. (RFC 2868)

with a Nortel ES470, in 3.7 versions, all VLANs can be attributed

in 3.6 versions, only VLANs on 3 or less characters can be attributed

to correct this problem, I changed dictionnary to - Standard Radius: No-Tags -