I am trying to find a command that will display Radius server statistics in the switch. We are using 802.1x for port based authentication. After searching Juniper website I could not find anything. The only commands that I found that you can run on the switch is:
show dot1x interface brief
show dot1x interface ge-0/0/1.0 detail
show dot1x interface
Show dot1x static-mac-address
show dot1x authentication-failed-users
Later I found a KB for M7i router that will display Radius server statistics.
Do you know if there is a similar command available on the switch?
[email protected]> show services l2tp radius statistics
RADIUS Authentication Statistics
Server 18.104.22.168, UDP port: 1812
Access requests : 40
Rollover requests : 5
Retransmissions : 2
Access accepts : 39
Access rejects : 1
Access challenges : 3
Malformed responses : 0
Bad authenticators : 0
Requests pending : 1
Request timeouts : 0
Unknown responses : 0
Packets dropped : 0
Solved! Go to Solution.
Received update from Juniter that there is no similar commands available, to check Radius server statistics, for EX series switches.