cancel
Showing results for 
Search instead for 
Did you mean: 

Trying to get Native Windows 10 client to work with Juniper EX Switch and UAC (IC4500)

WPJ
New Contributor

Trying to get Native Windows 10 client to work with Juniper EX Switch and UAC (IC4500)

I am trying to get the this setup and running using the native 802.1x client. I verified the installation with freeradius and everything seems to work. I changed the radius servers over to the UAC box and now I am getting my user authenticated OK via the UAC box and it assigns the requested attributes but on the windows side authentication I get the following error in the Wired Authentication Event log

802.1x Server rejected client authentication, due unexpected TLV or value mismatch for a TLV

on the UAC there is no errors and it shows sending out the vlan attribute correctly. I have the following setup on the authentication protocol page EAP-PEAP and then EAP-MS-CHAP-V2

any help would be very much appreciated.

thanks in advance
3 REPLIES 3
WPJ
New Contributor

Re: Trying to get Native Windows 10 client to work with Juniper EX Switch and UAC (IC4500)

on the UAC I'm running 4.4R3
Highlighted
Moderator

Re: Trying to get Native Windows 10 client to work with Juniper EX Switch and UAC (IC4500)

Please refer to this knowledge base article.

https://kb.pulsesecure.net/articles/Pulse_Secure_Article/KB40089
WPJ
New Contributor

Re: Trying to get Native Windows 10 client to work with Juniper EX Switch and UAC (IC4500)

Thanks but no this is for EX switch which is wired not wireless and also your arrival is for th2, im running rtm