We are configuring 2 IC 6500 2.2 R3 (the latest release) with switches 802.1X from Cisco and Huawei vendors. The switch Cisco worked fine, but we cannot make the switch Huawei work.
We saw that the config steps of the Huawei is almost the same that the 3Com swichtes.
We saw that the authentication (Active directory user) is passing and also the host checker policy. The problem is that the switch port is not opened, therefore the machine cannot acess the Network.
Do you experience an installation with Huawei (or 3com) Switches?
It is necessary to send some attribute from the IC?
It is necessary to upload the Huawei (or 3Com) Radius dictionary in order to make it work?
Thanks in advance
I'm afraid I don't have any direct experience of the Huawei or 3Com switches, but the Trapeze Networks switches (some of which were OEMed by 3Com) use the same authorization parameters that most L2 switches use to identify the behaviour of the port.
IIRC, it's something like Tunnel-Medium-Type (6 = IEEE-802), Tunnel-Type (13 = VLAN) and Tunnel-Private-ID, which is used to carry the VLAN tag.
If there is any logging on the Huawei, try turning on logging of AAA authorization. That may also give you a hint as to what it believes is missing.
Hope that helps,
Where did you find the huawei dictionary?