cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to start SBR on Linux server.

SOLVED
Highlighted
Occasional Contributor

Unable to start SBR on Linux server.

Hello community, 

 

I'm working on a SBR lab using version 7.5 Carrier. Install goes well, also configuring. 

 

The system is a Virtualized server runnning 8GB of RAM and 4 virtual cores.

 

However, everytime I try to start the sbrd service it gives me the following error:

 

[root@JuniperSMP radius]# service sbrd start
Starting radius server processes
RADIUS: Process ID of daemon is 2500
RADIUS: Starting DCF system
[root@JuniperSMP radius]# Document Root: /opt/JNPRsbr/radius/
RADIUS:
RADIUS: Steel-Belted Radius licenses
RADIUS: License String: Additional Info:
RADIUS: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Run license - expires 5/31/2013 - 1k sessions
RADIUS:
RADIUS: Total concurrent sessions licensed: 1000
RADIUS:
RADIUS: Allowed Transactions Per Second: 100 TPS
RADIUS:
RADIUS: Licenses enable this server to:
RADIUS: Run
RADIUS:
RADIUS: Licensed for Steel-Belted Radius Carrier
RADIUS: Attribute Editing enabled
RADIUS: Unable to initialize 3GPP2 Mobile IP
RADIUS: Failed to initialize Radius administration infrastructure
RADIUS: DCF system failed to start (hr = -2147467259 from dcfWaitStarted)
RADIUS: failed to start Radius Server ...
RADIUS: system.log: 02/26/2013 13:17:05: Exception: dcfRunTimeException (HRESULT: 80004005)
RADIUS: system.log: 02/26/2013 13:17:05: (0) from: SbrLegacyStartup.cpp:39
RADIUS: system.log: 02/26/2013 13:17:05: message: Legacy startup failed
RADIUS: system.log: 02/26/2013 13:17:05: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 13:17:05: (1) from: /home/localBuild/20130107075812/Source/SBR/../fsw/Linux/dcf1/include/dcf/dcfObj
RADIUS: system.log: 02/26/2013 13:17:05: Exception: dcfRunTimeException (HRESULT: 80004005)
RADIUS: system.log: 02/26/2013 13:17:05: (0) from: DcfInstanceBuilder.cpp:317
RADIUS: system.log: 02/26/2013 13:17:05: message: instance 'SbrLegacyStartup' returned an error from Start(), cannot continue starting the component
RADIUS: system.log: 02/26/2013 13:17:05: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 13:17:05: (1) from: dcfInitEngineClient.cpp:58
RADIUS: system.log: 02/26/2013 13:17:05: message: Exception Handled
RADIUS: system.log: 02/26/2013 13:17:05:
RADIUS: system.log: 02/26/2013 13:17:05: Exception: dcfRunTimeException (HRESULT: 80004005)
RADIUS: system.log: 02/26/2013 13:17:05: (0) from: dcfInitEngineImpl.h:212
RADIUS: system.log: 02/26/2013 13:17:05: message: error return from IDcfInitWork:Smiley FrustratedtartWork
RADIUS: system.log: 02/26/2013 13:17:05: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 13:17:05: (1) from: dcfInitEngineImpl.cpp:220
RADIUS: system.log: 02/26/2013 13:17:05: message: init engine run failed with exception thrown
RADIUS: system.log: 02/26/2013 13:17:05: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 13:17:05: (2) from: DcfInitEngine.cpp:89
RADIUS: system.log: 02/26/2013 13:17:05: message: Exception Handled
RADIUS: system.log: 02/26/2013 13:17:05:
RADIUS: system.log: 02/26/2013 13:17:05: Exception: dcfRunTimeException (HRESULT: 80004005)
RADIUS: system.log: 02/26/2013 13:17:05: (0) from: dcfInitThreadContext.cpp:55
RADIUS: system.log: 02/26/2013 13:17:05: message: failed to start system
RADIUS: system.log: 02/26/2013 13:17:05: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 13:17:05: (1) from: dcfInitThreadContext.cpp:59
RADIUS: system.log: 02/26/2013 13:17:05: message: Exception Handled
RADIUS: system.log: 02/26/2013 13:17:05:
RADIUS: system.log: 02/26/2013 13:17:05: Exception: dcfRunTimeException (HRESULT: 80004005)
RADIUS: system.log: 02/26/2013 13:17:05: (0) from: dcfInitThreadContext.cpp:55
RADIUS: system.log: 02/26/2013 13:17:05: message: failed to start system
RADIUS: system.log: 02/26/2013 13:17:05: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 13:17:05: (1) from: dcfInitThreadContext.cpp:59
RADIUS: system.log: 02/26/2013 13:17:05: message: Exception Handled
RADIUS: system.log: 02/26/2013 13:17:05: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 13:17:05: (2) from: dcfInitThreadContext.cpp:60
RADIUS: system.log: 02/26/2013 13:17:05: message: aborting start up process due to exception
RADIUS: system.log: 02/26/2013 13:17:05: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 13:17:05: (3) from: dcfInitThread.cpp:241
RADIUS: system.log: 02/26/2013 13:17:05: message: Exception Handled
RADIUS: system.log: 02/26/2013 13:17:05:
RADIUS: Initialization failure, server shutting down
RADIUS: Server shut down after failure
RADIUS: DCF system shutting down
RADIUS: DCF system failed to shut down (bad hr -2147467259 from dcfWaitStopped)

 

If I could get some insight into this issue I'd be very grateful.

 

Kind regards. 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Occasional Contributor

Re: Unable to start SBR on Linux server.

Yes that is correct.  Your welcome.

View solution in original post

16 REPLIES 16
Highlighted
Occasional Contributor

Re: Unable to start SBR on Linux server.

What version of Linux are you running?

 

Highlighted
Occasional Contributor

Re: Unable to start SBR on Linux server.

Since I don't have a rhel license I'm running Scientific Linux 6.1 x64

Highlighted
Occasional Contributor

Re: Unable to start SBR on Linux server.

Hi Sergei,

SBR isn't supported on anything other than Red Hat 6.1.  If you are attempting to use anything else you will have to make sure all of the necessary libraries are included in the version you are attempting to run.  

 

-Vin

Highlighted
Occasional Contributor

Re: Unable to start SBR on Linux server.

Thank you fot your reply.

 

I used yum to install the package so it could automatically retrieve all the required libraries, it did downloaded all the files and installation went smoothly, are there any other libraries that I should be aware of? 

Highlighted
Occasional Contributor

Re: Unable to start SBR on Linux server.

Yes there may be other libraries that are standard with Red Hat that are not included with the version you are running.

Contributor

Re: Unable to start SBR on Linux server.

yum will pull in the list of dependencies that were identified as necessary in QA.  We only qualified Red Hat, so there's no telling what might be missing.  

 

 

Highlighted
Occasional Contributor

Re: Unable to start SBR on Linux server.

Ok, so the only way to go is installing on red hat 6.1? 

 

Thanks. 

Highlighted
Occasional Contributor

Re: Unable to start SBR on Linux server.

Yes that is correct.  Your welcome.

View solution in original post

Highlighted
Occasional Contributor

Re: Unable to start SBR on Linux server.

Hello,  

 

I have installed the package on a RHEL 6.1 server and got exactly the same message: 


[root@JuniperSBR2 install]# service sbrd start
Starting radius server processes
RADIUS: Process ID of daemon is 4653
RADIUS: Starting DCF system
[root@JuniperSBR2 install]# Document Root: /opt/JNPRsbr/radius/
AppleTalk
AppleTalk
AppleTalk
RADIUS:
RADIUS: Steel-Belted Radius licenses
RADIUS: License String: Additional Info:
RADIUS: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Run license - expires 5/31/2013 - 1k sessions
RADIUS:
RADIUS: Total concurrent sessions licensed: 1000
RADIUS:
RADIUS: Allowed Transactions Per Second: 100 TPS
RADIUS:
RADIUS: Licenses enable this server to:
RADIUS: Run
RADIUS:
RADIUS: Licensed for Steel-Belted Radius Carrier
RADIUS: Attribute Editing enabled
RADIUS: Unable to initialize 3GPP2 Mobile IP
RADIUS: Failed to initialize Radius administration infrastructure
RADIUS: DCF system failed to start (hr = -2147467259 from dcfWaitStarted)
RADIUS: failed to start Radius Server ...
RADIUS: system.log: 02/26/2013 17:16:39: Exception: dcfRunTimeException (HRESULT: 80004005)
RADIUS: system.log: 02/26/2013 17:16:39: (0) from: SbrLegacyStartup.cpp:39
RADIUS: system.log: 02/26/2013 17:16:39: message: Legacy startup failed
RADIUS: system.log: 02/26/2013 17:16:39: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 17:16:39: (1) from: /home/localBuild/20130107075812/Source/SBR/../fsw/Linux/dcf1/include/dcf/dcfObj
RADIUS: system.log: 02/26/2013 17:16:39: Exception: dcfRunTimeException (HRESULT: 80004005)
RADIUS: system.log: 02/26/2013 17:16:39: (0) from: DcfInstanceBuilder.cpp:317
RADIUS: system.log: 02/26/2013 17:16:39: message: instance 'SbrLegacyStartup' returned an error from Start(), cannot continue starting the component
RADIUS: system.log: 02/26/2013 17:16:39: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 17:16:39: (1) from: dcfInitEngineClient.cpp:58
RADIUS: system.log: 02/26/2013 17:16:39: message: Exception Handled
RADIUS: system.log: 02/26/2013 17:16:39:
RADIUS: system.log: 02/26/2013 17:16:39: Exception: dcfRunTimeException (HRESULT: 80004005)
RADIUS: system.log: 02/26/2013 17:16:39: (0) from: dcfInitEngineImpl.h:212
RADIUS: system.log: 02/26/2013 17:16:39: message: error return from IDcfInitWork:Smiley FrustratedtartWork
RADIUS: system.log: 02/26/2013 17:16:39: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 17:16:39: (1) from: dcfInitEngineImpl.cpp:220
RADIUS: system.log: 02/26/2013 17:16:39: message: init engine run failed with exception thrown
RADIUS: system.log: 02/26/2013 17:16:39: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 17:16:39: (2) from: DcfInitEngine.cpp:89
RADIUS: system.log: 02/26/2013 17:16:39: message: Exception Handled
RADIUS: system.log: 02/26/2013 17:16:39:
RADIUS: system.log: 02/26/2013 17:16:40: Exception: dcfRunTimeException (HRESULT: 80004005)
RADIUS: system.log: 02/26/2013 17:16:40: (0) from: dcfInitThreadContext.cpp:55
RADIUS: system.log: 02/26/2013 17:16:40: message: failed to start system
RADIUS: system.log: 02/26/2013 17:16:40: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 17:16:40: (1) from: dcfInitThreadContext.cpp:59
RADIUS: system.log: 02/26/2013 17:16:40: message: Exception Handled
RADIUS: system.log: 02/26/2013 17:16:40:
RADIUS: system.log: 02/26/2013 17:16:40: Exception: dcfRunTimeException (HRESULT: 80004005)
RADIUS: system.log: 02/26/2013 17:16:40: (0) from: dcfInitThreadContext.cpp:55
RADIUS: system.log: 02/26/2013 17:16:40: message: failed to start system
RADIUS: system.log: 02/26/2013 17:16:40: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 17:16:40: (1) from: dcfInitThreadContext.cpp:59
RADIUS: system.log: 02/26/2013 17:16:40: message: Exception Handled
RADIUS: system.log: 02/26/2013 17:16:40: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 17:16:40: (2) from: dcfInitThreadContext.cpp:60
RADIUS: system.log: 02/26/2013 17:16:40: message: aborting start up process due to exception
RADIUS: system.log: 02/26/2013 17:16:40: -----------------------------------------------------------------------------
RADIUS: system.log: 02/26/2013 17:16:40: (3) from: dcfInitThread.cpp:241
RADIUS: system.log: 02/26/2013 17:16:40: message: Exception Handled
RADIUS: system.log: 02/26/2013 17:16:40:
RADIUS: Initialization failure, server shutting down
RADIUS: Server shut down after failure
RADIUS: DCF system shutting down
RADIUS: DCF system failed to shut down (bad hr -2147467259 from dcfWaitStopped)

 

So I don't think that this has to do with the linux distro I'm using.

 

Kind regards.