Unable to start SBR on Linux server.

[jcanchola_]

Do you have the startup log?  (20130226.log)

That'll give you an idea as to what's failing to load and what needs to be fixed in order to get radius to start.

[Skortscheff_]

Here is the log of when I tried to start.

02/27/2013 10:45:04: Licenses enable this server to:
02/27/2013 10:45:04: Run
02/27/2013 10:45:04: Licensed for Steel-Belted Radius Carrier
02/27/2013 10:45:04: Not licensed for Concurrency
02/27/2013 10:45:04: No IP address configured
02/27/2013 10:45:04: Initialized dbclusterlocal referenced in dbclusterlocal.gen
02/27/2013 10:45:04: dbclusterlocal: INITIALIZE SUCCESS
02/27/2013 10:45:04: Initialized Persistence plug-in "LOCAL"
02/27/2013 10:45:04: Attribute Editing enabled
02/27/2013 10:45:04: 3gpp2: Unable to determine local IP address
02/27/2013 10:45:04: 3gpp2: Initialization failed.
02/27/2013 10:45:04: Unable to initialize 3GPP2 Mobile IP
02/27/2013 10:45:07: Failed to initialize Radius administration infrastructure

[jcanchola_]

Make sure the hostname can resolve to the interface addresses.  I've seen something similar before where the hostname resolution fails and adding an entry in /etc/hosts allow's SBR to start.

[Skortscheff_]

I have already done that and the hostname is resolvable. 

[jcanchola_]

Does it resolve localhost and the configured IP?

[Skortscheff_]

There was a typo on the hosts file, had the hostname wrong, fixed it and the service started  

Thanks! 

[Skortscheff_]

02/27/2013 06:10:33: DCF system started
02/27/2013 06:10:33: Initialized Radius socket address 172.16.0.98 port 1646 (receive buffer size 229376 bytes)
02/27/2013 06:10:33: Initialized Radius socket address 172.16.0.98 port 1813 (receive buffer size 229376 bytes)
02/27/2013 06:10:33: Initialized Radius socket address 172.16.0.99 port 1646 (receive buffer size 229376 bytes)
02/27/2013 06:10:33: Initialized Radius socket address 172.16.0.99 port 1813 (receive buffer size 229376 bytes)
02/27/2013 06:10:33: Initialized Radius socket address 172.16.0.98 port 1645 (receive buffer size 229376 bytes)
02/27/2013 06:10:33: Initialized Radius socket address 172.16.0.98 port 1812 (receive buffer size 229376 bytes)
02/27/2013 06:10:33: Initialized Radius socket address 172.16.0.99 port 1645 (receive buffer size 229376 bytes)
02/27/2013 06:10:33: Initialized Radius socket address 172.16.0.99 port 1812 (receive buffer size 229376 bytes)
02/27/2013 06:10:33: LatencyLogger is Disabled
02/27/2013 06:10:33: Radius Authentication Server started ...
02/27/2013 06:10:33: Radius Accounting Server started ...
02/27/2013 06:10:33: Extended Proxy: No [Processing] section in /opt/JNPRsbr/radius/proxy.ini
02/27/2013 06:10:33: Extended Proxy: Default proxy identification processing enabled
02/27/2013 06:10:33: Number of Authentication Plugin : 0, Number of Accounting Plugin : 0
02/27/2013 06:10:33: Steel-Belted Radius is operational.