Hi Guys,
Need your assistance on how to resolve the authencation problem i encountered using domain user account.
My setup is like this.
User --> Juniper NS-50 --> SBR EE (trial version) --> AD
If i tried to access the NS-50 via telnet or HTTP, login failed message is being returned but if i viewed it from SBR > Statistics > RADIUS Clients, both Auth Reqs and Accepts fields shows successful login.
Below are my confoguration on NS-50 and SBR EE for your reference.
NetScreen-50
Configuration > Auth > Auth Servers
Name: Radius
IP/Domain Name: 192.168.10.11
Timeout: 30
Force Timeout: 60
Account Type: Admin
Source Interface: ethernet1(Zone Trust)
RADIUS:
RADIUS Port: 1645
Retry Timeout: 3 seconds
Shared Secret: qwertyuiop
Configuration > Admin > Administrators
Admin Privilege: Get privilege from RADIUS server
Admin Auth Server: Local/Radius
Policies
Trust to Trust - any any permit
SBR EE
Steel-Belted Radius
RADIUS Clients
Name: NS50
IP address: 192.168.10.15
Shared Secret: qwertyuiop
Make or Model: -Standard Radius-
Thanks in advance
pnoyxpat
