Hi All,   I am runnning a pair of MAG 2600 in A/A and noticed a weird problem when I started using Junos Pulse instead of Network Connect.   When I connect with Junos Pulse my connection seems to be dead for a good 20 or so seconds then it starts to work.  I attached the ping results to show the ammount of time it takes before the connection begins to work.   C:\Documents and Settings\XPMUser>ping 172.29.100.50 -t Pinging 172.29.100.50 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Request timed out. Request timed out. Request timed out. Request timed out. Request timed out. Request timed out. Request timed out. Request timed out. Request timed out. Request timed out. Reply from 172.29.100.50: bytes=32 time=7ms TTL=124 Reply from 172.29.100.50: bytes=32 time=3ms TTL=124 Reply from 172.29.100.50: bytes=32 time=3ms TTL=124 Reply from 172.29.100.50: bytes=32 time=9ms TTL=124 Reply from 172.29.100.50: bytes=32 time=14ms TTL=124     I should note that If I use network connect I have no issues and traffic starts passing right away.   Also I can see that on the upstream switch there is no ARP present for my host station until the pings start working.   Anybody have any ideas what could be causing this?   Details:   -  MAG 2600 7.3R8 - Users dropped into a specific tagged USER vlan connected to a Juniper EX switch.   ... View more

Hi All,   I am used to deploying MAG 2600 where I only have 2 ports to work with (Internal and External).  I noticed that the MAG 4610 has three ports.   When it is in SSL VPN Mode is the 3rd port available?  I would love to have an Internal/External and then management port.     Thanks     ... View more

Hi All, I am setting up VMWare view integration with an SA-2500. I have found many documents and videos showing how to set this up. All the tutorials had the same steps ( configure through resourse profile). My issue is that once I have the bookmark and launch from a new pc it screams that i need the VMWare view client installed. Is there a way to have the SSL VPN deliver the client software much in the same way it does for NC or Secure meeting? Thanks! ... View more

Hi All, I have my SSL VPN setup to authenticate Admin users using Radius. I cant seem to find an option to tell the system to use the local admin database to authenticate in the event that it cannot reach the Radius server. My current workaround is that have a different Admin page that uses the local account. I would prefer to have just one page that always tries Radius first but then uses Local if radius is unreachable. Is this possible on the SA-2500? Thanks! ... View more

Hi Guys, I am new to seting up SA-2500's using the External and Internal port. I understand the concept of having the External in the DMZ and the internal in the trusted network. My Question is how does the box figure out what traffic goes out what port? I noticed that both ports have a default gateway setup. How does the box know to send traffic out the internal port of the external port? ie) A user on the internet comes in, hits the internal port. The return traffic will now follow the default gateway which is now two routes, which wins? I know there is a basic answer but the docs are brutal for explaining this basic level of operation. Thanks! ... View more