About Charles_Woo_

Charles_Woo_ · ‎11-14-2011

Dear Raveen, > To configure Pulse dot1x you should do below: > > - Start Wired AutoConfig service > - Navigate to Local Area connection Properties (NIC properties) > - Click 'Authentication' tab. > - Under 'Choose a network authentication method:' drop down box, you should see 'Juniper Networks: EAP-TTLS' > - Select EAP-TTLS to do dot1x using pulse. Is there anyway to automate the above process. I am thinking how to mass deployment ... Thanks, Charles

Charles_Woo_ · ‎07-20-2010

Hi All, Anyone tried using UAC 802.1x with H3C switch? Any doc mentioned? Thanks. Kind Regards, Charles

Charles_Woo_ · ‎06-15-2010

I tried. Work without problem. Mine is win7 32bit

Charles_Woo_ · ‎05-06-2010

Hi All, I am wondering how to tackle a mulitple LAN interface situation. If a end point with 2 LAN interface, one (interface A) is 802.1x authenticated by UAC, while another (Interface B) is directly connect to internet. Can OAC/UAC disable that the "interface B" so that only "interface A" is active. The reason is that ppl will worry the attack can launch from untrust network interface (interface B) to the internal resource via "interface A". Thanks first. Best Regards, Charles

Re: JUNOS PULSE and Juniper IC

UAC 802.1x with H3C switch

Re: Windows 7 clients cannot download the Citrix I...

UAC/OAC: How to address multiple LAN issue.