About pkcpkc_

pkcpkc_ · ‎05-27-2011

Hi, looks like the SA will leave for MAG, but as far as I know the IVS functionnaliuty won't be available on this platform. How can I switch to this hardware if I have an SA with IVS config ?

pkcpkc_ · ‎03-09-2011

Hi, is this still unsupported ? is it in the roadmap somewhere ? thanks.

pkcpkc_ · ‎12-28-2010

Are you sure your ivs with ip 10.146.0.199 should use as gateway 10.163.0.1 ?

pkcpkc_ · ‎12-28-2010

Can you tell me if there is a software keyboard available for entering the password ? (in case you have a key logger). there are also some demands regarding linux 64 bits and network connect. some forums mentions it and it works from the command line, but maybe a technote would be helpfull for this.

pkcpkc_ · ‎12-02-2010

I'm not sure you'd like the login and password to be sent from the radius or saml to the sa. Can you configure a double authentication saml + radius so you can do sso with saml afterwards ?

pkcpkc_ · ‎11-10-2010

Check in the logs the difference between the pc connection and the iphone one. Does the iphone browser prompt for a certificate when you connect to the ssl vpn ?

pkcpkc_ · ‎11-10-2010

Break the cluster could be interesting if you can have both old and new vip active. if you disconnect the master from the network, the backup will do the job. You can then remove the second node from the cluster config, change addressing, then check on the one node new vip cluster if everything works fine. As the internal VIP is the same, you can't plug the one node new cluster back into the network without shutting down the second node. If everything is ok with the new VIP you can delete cluster config on the second node, recreate and put it back into the cluster.

MAG and IVS

Re: Change SSL port

Re: can not ping to server from one IVS to another...

Re: Are there any requests for new SSL VPN how-to ...

Re: SSO with SecurID and SAML

Re: Junos Pulse Certificate problem

Re: Changing the IP of SSL in cluster