Our admin password was recently changed and the old password was updated in our password manager. Unfortunatly the password did not "take" and I cannot login with the new or the old password. I have a console on the cluster (tried this on both nodes) and I am failing to see how I can create the super admin session. It keeps asking me to login. Here is what I see: ---------------------------------------------------------------------------------------------------------------------------- Press Enter to modify system settings. Welcome to the Juniper Networks Junos Pulse Secure Access Service Serial Console! Please input an administrator username and password. Admin username: admin Password: Error: Username or password do not match_ ----------------------------------------------------------------------------------------------------------------------------_ What do I have to do to get this reset again and regain admin access? We're running j-sa-7.1R1.1-b17943_ on both if that changes anything._ Thanks in advance! ... View more

Just wanted to confirm something before going ahead... So I have both SA-2000's wired up and all 4 interfaces pinging. I am about to setup the cluster but I want to confirm that once I have this going the users currently using the external IP of what will be the primary node will not be disconnected or have any other service interruption while bringing up the cluster. As long as this is the case I can update the external DNS record to point to the new VIP on off-hours. Thanks in advance! ... View more