About wigneys_

wigneys_ · ‎06-23-2010

thanks to all who responded. It was missing/misconfigured selective rewriting. cheers, Steve...

wigneys_ · ‎06-20-2010

Hi Matt, Thanks for your response... The users are following a link on the SA homepage created automatically by the resource profile...when I try to re-create the profile with the launch.cgi URL as you suggest, I'm getting an "invalid resource" message. I'm sure I'm missinig something - can you shed any more light? Appreciate your help, thanks, Steve.

wigneys_ · ‎06-02-2010

Hi, A puzzling problem with my SA2000 (6.5R4). I have a web resource based on a Sharepoint template pointing to an intranet site. When users click the link, they get a 404 from their (external) DNS provider. I've confirmed that the SA2000 DNS is working, as when using NC it's fine, plus I can resolve and ping the sharepoint server from the SA box (using troubleshooting commands). The sharepoint resource works fine from "inside" (obviously), even passing SSO credentials successfully... What could I be doing wrong? Any help much appreciated.. cheers, Steve.

wigneys_ · ‎05-25-2009

ok, now it's weird. I got onto the console I/F and started a super admin session - checked all my admin accounts and they are "enabled". created two new platform admin accounts. went to log in: same result for existing admin accounts. New platform admin accounts get a "you are not allowed to log in" message. I must be missing something, but it's driving me nuts! Until this episode I've had to spend exactly 5 minutes on SA2000 admin/maintenance! any ideas? Steve.

wigneys_ · ‎05-21-2009

thank you Kevin.... Steve.

wigneys_ · ‎05-20-2009

Hi, I recently powered down and physically relocated my SA2000. All networking (domains, IP ranges etc) in the new location is identical to that in the old location. All users are able to log in and everything is normal for them, but every single administrator account set up on the box has been "disabled". When we go to log in we get a "Your account has been disabled" message. The accounts were definitely fine when the box went down (the last thing I did before relocation was to log on and check there were no active users), and given that all accounts are affected I suspect this is behaviour by design for some scenario? Has anyone had this happen to them, or does anyone have suggestions about how I go about re-enabling the accounts? I'd hate to have to rebuild the box.... thanks, Steve.

wigneys_ · ‎07-23-2008

thanks - I'll give that a go...

wigneys_ · ‎07-17-2008

Hi, i'm trying to get access going to Hyperion webanalysis reporting via a couple of methods on my SA2000 with no success. The application calls a JSP page: 10.65.16.8:16000/webAnalysis/webAnalysis.jsp, which spawns a java applet that talks to 10.65.16.8:19000/WebAnalysis/processor Initially, I thought that a web profile would be OK - I have a *:* (ie, open) rule on browsing so assumed it would work. No. Tried launching the link in a new window - no difference. The landing page displays, but the applet is not spawned... I then created some WSAM destinations to 10.65.16.8:16000 and 10.65.16.8:19000 - still no go (same behaviour as before) and then tried JSAM with a similar config and still no go. Everything works if I use network connect, but I don't want to do that for everyone...Can anyone help? thanks in anticipation! Steve.

wigneys_ · ‎07-17-2008

Hi, I'm trying to help a remote user running Linux to get rdesktop (usr/bin/rdesktop) going via SSL VPN (SA 2000) to start terminal services sessions on Windows servers... what's the best (if possible!) way to get this done? I was playing around with JSAM but realised I didn't know what I was doing..any general guidance or advice would be much appreciated... cheers, Steve.

Re: DNS problem with Core web functionality

Re: DNS problem with Core web functionality

DNS problem with Core web functionality

Re: Administrator accounts disabled

Re: Administrator accounts disabled

Administrator accounts disabled

Re: Windows RDP from Linux client?

SA2000 and Hyperion WebAnalysis Reporting

Windows RDP from Linux client?