As many of you know, there was an issue with Windows 10 and Pulse Secure with Juniper SRX's as noted https://kb.juniper.net/InfoCenter/index?page=content&id=TSB17441&actp=METADATA Traffic loss will exhibit the following characteristics: Client traffic will arrive at SRX via VPN tunnel as ESP packets SRX will decrypt traffic and pass to remote-protected resource Remote-protected resource will reply sending traffic back towards SRX SRX will encrypt traffic and send to client via VPN tunnel as ESP packets ESP VPN packets will be received by client LAN adapter Decrypted packets will not be reported on VPN virtual adapter Client application will not report receiving packet from remote-protected resource This was an issue with version 5.x, among others (we normally stayed on 5.3.3) Great news that version 9.1R2 fixes this issue, which I've tested if a laptop is wired in, or on wifi. Where the issue comes in is if a laptop has a cellular card built in. We have duplicated this with multiple laptops. There is one difference though with 9.1r2, traffic isn't hitting the SRX. Also, it should be noted that I tested with my cell phone acting as a hotspot, and do not have any issues (same cell carrier) as the laptop is connecting to the cell via wifi (not with cellular card). I thought I'd reach out to the forums and see if anyone has experienced this, and if you were able to tweak something to get it to work.
... View more